NC1600C
2. Setting Up Your Projector
D-26
2.4
Mounting the primary lens
[1]
Remove the front cover
(top) of the projector.
[2]
Remove the lens cap.
If the lens has a lens cap, remove the lens
cap here.
[3]
Place the side with the lens
insertion guide hole face up,
then insert the lens all the
way to the back.
Align the lens ring with the control
connector position, and insert it straight in.
The lens cannot be inserted all the way
back if the lens fixing lever is on Lock. In
this case, use a 6 mm Allen wrench to turn
the lens fixing lever clockwise to Unlock,
then insert the lens.
Tips
•
Use a 6 mm Allen wrench to lock/unlock the lens fixing cover. If turned by hand, the lever
will only spin freely and cannot be locked or unlocked.
[4]
Turn the lens fixing lever
counterclockwise to fix the
lens.
Lock the lens by turning the lens fixing
lever counterclockwise with a 6 mm Allen
wrench.
Lens fixing lever
Control connector
Lens fixing lever
