NC1600C
1. Before Setting Up Your Projector
D-15
1.4
Moving the projector
The shipment handle is attached to the projector when it is shipped from the factory.
Be sure to use this shipment handle when moving the projector.
1.4.1
Shipment handle installation locations
The shipment handle can be installed in one of the three locations shown below.
Left/Right installation
Front/Back installation
(When shipped from the factory) Push the handle all the way
in to use
Pull the handle to use
When installing the shipment handle to the front and back, insert the handle all the way in
(factory shipment condition) to use it. Do not pull the handle out to use the handle when it is
in the front and back position.
The shipment handle can be installed and removed with the procedures described below.
Shipment handle
