NC1600C
2. Setting Up Your Projector
D-30
2.5.3
Mount the turret
Below, the anamorphic lens stand may be referred to simply as “the stand”, the anamorphic
lens as “the anamo-lens”.
Preparations:
Prepare Allen keys (for M8 and M6 screws) and a Phillips screwdriver (also tools for
adjustments)
Caution
•
In the mounting steps below, DO NOT remove screws other than those indicated in
each step; otherwise it could lead to injury.
[1]
Remove the left and right
panels from the front panel
of the projector.
The panels and screws that are removed
will be used when mounting the stand, so
be sure to put them in a safe place.
[2]
Fix shaft (L) and shaft (R)
to the projector using the
eight included M8 Allen
screws.
Projector side
connector
Left
panel
Phillips
screwdriver
Right panel
Shaft (R)
Allen key
(for M8 screws)
M8 Allen screw
Shaft (L)