NC1600C
2. Setting Up Your Projector
D-32
2.5.4
Mounting of the anamorphic lens
[1]
Loosen the two roll angle
fixing knobs, then turn the
lens holder counterclockwise
and remove it from the slide
unit.
Turn the lens holder’s knob hole to the
position of the roll angle fixing knobs and
pull the lens holder towards you.
Caution
•
Pay attention not to have the
finger caught when rotating
the lens holder.
[2]
Mount the lens holder onto
the anamo-lens.
<1> Loosen the lens holder’s lens fixing
bolt.
<2> Line up the lens holder with the
anamo-lens (perpendicularly) and
mount it on the anamo-lens. (Be
careful not to touch the lens.)
<3> Tighten the lens holder’s lens fixing
bolt.
Caution
•
To prevent damaging the lens,
be sure to attach the lens cap
over the lens when performing
this operation.
Lens holder
Lens fixing bolt
Lens cap
Alley key
(for M6 screws)
Anamo-Lens
Front lens
direction
Lens Holder
Roll angle fixing knobs
