NCT Group 100T, Operator'S Manual

Page: 64 / 144

4 Editing part programs
64
screen. By returning to the EDIT screen the other program can be seen in the window
active when exiting. The active window as well as the program numbers shown in the
windows are indicated in the 18
th
status line. The cursor is seen in the active window,
and this is also the place where editing actions may be executed.
By a repeated push the
Window key is unpressed, the screen is switched back to single
window form and the program, the window of which was active at the time of the
pressing of
Window key, can be continued to be edited.
Change Window Action: Applied when two windows are present at a time. As its effect the
cursor goes to the other window. Henceforward the other window is active and editing
actions can be realized there.
4.9 Help
File
1
Edit
2
Insert
misc 3 Insert
cond 4 Insert
operat 5 Insert
funct 6 Window
7
Change
wind 8 Help
9 0
Help Action: The pressing of the key is only effective if the cursor is moved to the letter G of
a G code (e.g., G02) or if previously a G code interpretable by the help function is
selected in the text by means of shift and cursor moving keys, i.e., according to the
rules of selection. The key remains pressed down. By the repeated push of the key the
help is closed.