NCR RealPOS 50, User Manual

Page: 120 / 158

6-4 BIOS Updating Procedure
Option 2 ‐ Update DMI only ‐ Serial/Model/Class update ONLY (no BIOS Update)
This option lets you enter the DMI information only. The BIOS is not updated.
1. Highlight Option 2 and press [ENTER] .
2. At the prompt press [ENTER] to enter the Class/Model/Serial Number
information (DMI). Follow the onscreen format instructions.
Example:
7611-1000-8801
[ENTER]
54-19378230
[ENTER]
3. Press
[1]
to confirm the data and to continue.
4. Remove the USB device before the system boots.
5. System is ready for operation.
Option 3 ‐ Update of BIOS ‐ Always prompts for Serial/Model/Class
This option prompts for Class/Model/Serial information at the beginning of the
program and then updates the BIOS only.
1. Highlight Option 5 and press
[ENTER]
.
2. At the prompt press
[ENTER]
to enter the Class/Model/Serial Number
information (DMI). Follow the onscreen format instructions.
Example:
7611-1000-8801
[ENTER]
54-19378230
[ENTER]
3. Press [1] to confirm the data and to continue.
4. The Flash Program updates the BIOS and automatically reboots the terminal.
Option 4 ‐ Update BIOS ‐ Default Serial/Model/Class information
This option is for Service Personnel only. It updates the BIOS but leaves the Class/
Model/Serial fields empty (erased). The DMI information is then entered when the
board is installed in a terminal.
1. Highlight Option 4 and press [ ENTER ].
2. The BIOS are updated and the system reboots.
3. Remove the BIOS Update media before the system boots.
4. System is ready for operation.