6-2
Chapter 6: Using the NCR 4430 Emulation Application
Note:
If the sumcheck over the setup parameters fails, the program
defaults to:
hex card type; SCER=none;
Buffer MSR data first;
Host-initiated buffering
Note:
The message below displays for one second:
Error
Table Checksum
If the Sumcheck is Successful
If the sumcheck succeeds, the screen below displays for two seconds.
To enter 4430 emulation Setup, press F1 before the screen below times
out; otherwise, Setup is bypassed and the loaded 4430 emulation
application uses either the previously saved (if applicable) or the
default parameters.
Press F1 Key
Enter 4430 Setup
Note:
If you do not press F1 before the above screen times out, and
you wish to change the existing Setup parameters, you must power-
cycle the NCR 5945 and try again.
Summary of Contents for 5945
