![background image](http://html2.mh-extra.com/html/ncr/5945/5945_user-manual_3729157020.webp)
2-8
Chapter 2: Installing the NCR 5945
Connecting the NCR 5945 to the NCR
7452/7453/7454 Workstation
Migrating to the new 5945 Electronic Payment Terminal requires
minimal effort. The following illustrations show the steps needed to
connect the 5945 to an NCR 7452 or 7453 workstation. Connector
locations may vary slightly from model to model
Installation
Upon arrival, inspect all shipping containers for damage. If damaged,
open the box and verify that the 5945 Electronic Payment Terminal and
accessories have not been damaged. Report any damage to the
shipping carrier.
Find the appropriate cable configuration and power supply or power
supply cable adapter. (See Cable Configurations section of this
document.) Remove 5945 from shipping container and install either the
RS-232 Expander Cable or the RS-232 (9-Pin D Shell) to the 5945,
routing cable through the cable relief tray.
Save shipping containers for future use.
13258
CRT AC Power
Adapter Board Slots
AT
PCI
AT/PCI (Shared)
AT
Keyboard
AC Power
Aux Power
(Printer)
Aux
Power
Mouse RS-232
Port 1
Parallel
Port
VGA
RS-232
Port2
LAN
UPS Connector
Summary of Contents for 5945
