NAVTEQ iGo Primo User Manual Download Page 59

Page: 59 / 134

The preset search categories appear:



If an active route exists, petrol stations are searched along the route.



If there is no active route (destination is not selected), they are searched
around the current position.



If the current position is not available either (no GPS signal), they are
searched around the last known position.



If an active route exists, accommodation is searched around the

destination of the route.



If there is no active route (destination is not selected), they are searched
around the current position.



If the current position is not available either (no GPS signal), they are
searched around the last known position.



If an active route exists, restaurants are searched along the route.



If there is no active route (destination is not selected), they are searched
around the current position.



If the current position is not available either (no GPS signal), they are
searched around the last known position.



Summary of Contents for iGo Primo







































































































































Search results

Summary of Contents for iGo Primo

Reviews:

Brands by name

Popular brands

NAVTEQ iGo Primo, User Manual

Search results

Summary of Contents for iGo Primo

Reviews:

Brands by name

Popular brands