NAVTEQ iGo Primo User Manual Download Page 25

Page: 25 / 134

Rotating left and
right

Changes the horizontal view angle of the map.

Tap the button once to modify the view in large
steps, or tap and hold the button to modify it
continuously and smoothly.

2D or 3D view

Tap this button to switch between the 3D
perspective and 2D top-down map view
modes.

Compass in 2D
map view mode

The direction of the compass shows North.
Tap the button to switch to North-up view, and
then tap again to rotate the map in the
previous direction.

Compass in 3D
map view mode

The direction of the compass shows North.
Tap the button to switch to North-up view, and
then tap again to rotate the map in the
previous direction.

Location
information

Tap this button to open a new screen with
information about the selected map point, the
Cursor.

Return to normal
navigation

Tap this button to move the map back to follow
the current GPS position. Automatic map
rotation is also re-enabled.

The map manipulation buttons disappear and
navigation continues.

Additional options

Tap this button to open a list of additional
features like saving the Cursor as a Favourite
destination, or searching for Places around the
Cursor.

Summary of Contents for iGo Primo







































































































































Search results

Summary of Contents for iGo Primo

Reviews:

Brands by name

Popular brands

NAVTEQ iGo Primo, User Manual

Search results

Summary of Contents for iGo Primo

Reviews:

Brands by name

Popular brands