NAVTEQ iGo Primo, User Manual

Page: 10 / 134

10

Tap to start navigating on the map. The button itself is a miniature
live map that shows your current position, the recommended route and the surrounding
map area. Tap the button to enlarge the map to the full screen.

Tap to stop navigation and exit the software.
2.2 Buttons and other controls on the screen
When you are using your unit Media , you can tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to
perform a major reconfiguration, or you are about to lose some of your data or settings.
Otherwise, your
system, media saves your selections and applies the new settings without
confirmation as soon as you use the controls.
Type Example Description How to use it
Button Tap it to initiate a function,
to open a new screen, or
to set a parameter. Tap it once.
Button with
value Some buttons display the
current value of a field or
setting. Tap the button to
change the value. After the
change, the new value is
shown on the button. Tap it once.
Icon
Shows status information.
Some icons also function
as a button. Tap them
once.
List When you need to select
from several options, they
appear in a list. Grab the list anywhere
and slide your finger up
or down. Depending on
the speed of the sliding,
the list will scroll fast or
slow, only a bit or till the
end.
Alternatively, move
between pages with the
and buttons
and tap the value that
you want.