NavSure N420i User Manual Download

Page: 7 / 78

10. The monitor employs an automatic motorized mechanism. To prevent

damage to the core mechanism, please do not push, pull or swivel the
monitor manually.

1.4

1.4 Disconnecting

Disconnecting

Disconnecting the

the

the Battery

Battery

To prevent a short circuit, turn off the ignition and remove the negative (-) battery
cable prior to starting the installation.

Note

Note::::

If the unit is to be installed in a car equipped with an on-board drive or

navigation computer, do not disconnect the battery cable. If the cable is
disconnected, the preset memory may be erased. Under these conditions, use
extra caution during installation to avoid causing a short circuit.

Note

Note::::

It is especially important that you read the

WARNIN

WARNINGS

and

NOT

NOTES

in this

manual.

Summary of Contents for N420i















































































Search results

Summary of Contents for N420i

Reviews:

Related manuals for N420i

Brands by name

Popular brands

NavSure N420i, User Manual

Search results

Summary of Contents for N420i

Reviews:

Related manuals for N420i

Brands by name

Popular brands