24
Storing
Storing
Storing
Storing a
a
a
a Station
Station
Station
Station
1. Select a band (if needed), then select a station.
2. Touch and hold an onscreen preset button for three seconds. The preset
number appears at the top of the screen.
Recalling
Recalling
Recalling
Recalling a
a
a
a Station
Station
Station
Station
1. Select a band (if needed).
2. Touch an onscreen preset button to select the corresponding stored station.
7.7
7.7
7.7
7.7
Seek
Seek
Seek
Seek the
the
the
the PTY
PTY
PTY
PTY (Program
(Program
(Program
(Program Type)
Type)
Type)
Type)
Touch
in the screen to enter PTY menu, then touch to select one in the PTY
menu, the unit will auto seek the next available PTY by increasing tuning
frequency until the program type matches the PTY, if no matched was found ,the
tuner will return to original radio and “None” is displayed .
7.8
7.8
7.8
7.8
AF
AF
AF
AF (Alternative
(Alternative
(Alternative
(Alternative Frequency/Auto
Frequency/Auto
Frequency/Auto
Frequency/Auto Following)
Following)
Following)
Following) Function
Function
Function
Function
Touch
in the screen to activate/deactivate AF function. When AF is activated
and a radio signal is too weak, the tuner automatically switches to the best
alternative frequency.
Note:
Note:
Note:
Note:
During auto switching radio frequency, some interference could be heard.
Turn off AF function can cease this issue.
7.9
7.9
7.9
7.9
TA
TA
TA
TA (Traffic
(Traffic
(Traffic
(Traffic Announcement)
Announcement)
Announcement)
Announcement) Function
Function
Function
Function
Touch
in the screen to activate/deactivate TA function. When TA is activated,
the unit will auto seek an available TP or TA station .After the seeking, no
matter if PTY was found, the tuner will auto seek each 1 minutes.
When TA is activated and a traffic announcement is received, the current playing
source is overridden by the traffic announcement automatically, if the tuner was
last set to the FM band but not if it was last set to the AM band. When traffic
announcement is over, the current playing source will be resumed.
Note:
Note:
Note:
Note:
There are three methods to activate/deactivate TA function.
·
Touch
on the screen on Tuner mode.
·
Press and hold the SCAN button on the front panel .
·
Touch TA option directly on the screen on ASP SETUP mode, then
select
the OFF/ON option of submenu appeared in the second row.
