Navistar ProStar+, Operation And Maintenance Manual

Page: 84 / 304

Controls / Features
Quadrant 2: Text and Warning Messages
These messages inform the driver of vehicle conditions. If the
message flashes, it will flash for 3 – 5 seconds, and then will
be displayed for an additional 3 – 5 seconds. If more than one
message is viewable, the displayed message will be followed by
an asterisk (*), indicating multiple messages. To view additional
messages, press and release the Display Control button to
proceed to the next message.
The following is a list of the routine Text and Warning messages
that can be displayed:
Quadrant 2 – Display
Messages
Description Message Flashes (Yes
/ No) Warning Indicator
Association
Parkd Regen Active Message is displayed during a parked regeneration. No No
Load Shedding Message is displayed when electrical load control and
shedding feature is implemented. Yes No
Washer Fluid Low Indicates low washer fluid level. Yes No
Electrical Fault When instrument panel gauge cluster's ability to display
diagnostic codes is enabled, this message is displayed
when there are active diagnostic codes. Yes No
Check A/C Indicates a fault in the HVAC System. Yes No
Parkd Regen Inhibited Message is displayed when parked regeneration has been
requested, but is not performed due to a vehicle interlock
or an engine fault. No No
Air Filter Restriction Indicates restricted air flow to the engine. Yes No
Exterior Lamp Check Active Indicates that Exterior Lamp Check is in progress. Yes No
HVAC Temp Setting Bar graph displayed show temperature setting in low to
high increments. No No
72