Navistar ProStar+, Operation And Maintenance Manual

Page: 37 / 304

Model Description
Chassis Skirt Installation
NOTE: There are two hooks on the back side of the chassis
skirt that must be fully engaged on the mounting bar to be
secured properly.
1. Grasp both ends of the chassis skirt, hold the bottom
of the chassis skirt away from the vehicle, and slide the
chassis skirt under the edge of the cab.
2. Lower the bottom of the chassis skirt onto the mounting
bar, align the chassis skirt on the front chassis skirt, and
engage the two hooks.
3. Rotate the locking handle 90° upward to lock the chassis
skirt in position.
4. Secure the locking handle in the keeper bracket.
NOTE: If vehicle is ordered with the optional No Idle
Solution, the rear passenger side chassis skirt that covers
additional batteries will remove and install the same as the
rear driver-side chassis skirt.
Extended Chassis Skirts
Optional extended chassis skirts are available for the ProStar
®
+
Series trucks with sleeper and full aero package. While
the passenger-side extended chassis skirt is stationary, the
driver-side skirt opens to allow access to the deck ladder. To
open, pull out on the upper right hand corner of the extended
chassis skirt and open to its full extension. To close, grab the
upper right hand corner of the extended chassis skirt and guide
it to its fully closed position.
25