Navigon PNA 5100 User Manual Download Page 29

Page: 29 / 172

Getting Started

Preparing your NAVIGON 5100 max for use

December 2008

NAVIGON 5100 max User’s Guide

Version 2.1

NAVIGON, INC.

Inserting the memory card

The SD memory card contains maps and navigation software. It also stores saved
destinations, routes, and logbook entries.

•

Insert the memory card provided into the slot on the side of the device. Press the
card into the device until it locks into place.

Removing the memory card

1. To switch the navigation device to Standby, press and release the

(

On/

Standby/Off

) button.

2. Press the memory card gently into the device until the lock disengages.

The card pops up slightly.

3. Gently slide the card out of the slot.

Summary of Contents for PNA 5100













































































































































































Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands

Navigon PNA 5100, User Manual

Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands