Navigon PNA 5100 User Manual Download Page 95

Page: 95 / 172

My Destinations

Importing Destinations from Outlook

December 2008

NAVIGON 5100 max User’s Guide

Version 2.1

NAVIGON, INC.

The following page displays.

7. Click

Finish

to complete the installation.

Copy Outlook Contact Information to the NAVIGON 5100 max

After the NAVIGON Sync software is installed on your computer, you can copy Out-
look contact information to your

NAVIGON 5100 max

. A copy of the information is

saved on your device. The Outlook information on your computer is not affected.

1. Make sure that your computer and your

NAVIGON 5100 max

are powered on.

2. Connect the large end of a USB cable to your computer and the small end of the

cable to your

NAVIGON 5100 max

On your computer:

3. Navigate to the location where you installed the NAVIGON Sync software. (See

page 75) and double click on the

Sync.exe

file.

The NAVIGON S

YNC

WINDOW

displays.

4. Click

File

Contact Folder

The S

ETTINGS

WINDOW

displays.

Summary of Contents for PNA 5100













































































































































































Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands

Navigon PNA 5100, User Manual

Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands