Navigon PNA 5100 User Manual Download Page 38

Page: 38 / 172

Basic Operations

Starting the NAVIGON 5100 max

NAVIGON 5100 max User’s Guide

December 2008

NAVIGON, INC.

Version 2.1

4. After you have read and fully understood the text, tap

The M

AIN

WINDOW

displays.

Starting the NAVIGON 5100 max

1. Press and hold the

(

On/Standby/Off

) button for two (2) seconds, then

release.
•

If password protection has been activated, the

NTER

PASSWORD

WINDOW

opens.

- Enter the password.

- Tap the

Continue

button.

After being turned off, when the navigation device is turned back on, the following
message appears:

2. After you have read and fully understood the text, tap

Note:

If you do not accept these instructions, tap

Cancel

to exit the navigation soft-

ware.

You can change these settings at any time. For more information, see “General Set-
tings” on page 139.

See “Security” on page 33 for more information on using passwords.

Note:

This message does not display if the device is turned back on from Standby.

Summary of Contents for PNA 5100













































































































































































Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands

Navigon PNA 5100, User Manual

Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands