Navigon PNA 5100 User Manual Download Page 109

Page: 109 / 172

Routes

Navigation

December 2008

NAVIGON 5100 max User’s Guide

Version 2.1

NAVIGON, INC.

Finding POIs at Highway Exits

While traveling on a controlled access highway, you can find POIs (such as gas stations or
lodging) at the next five exits along your route.

Create a route or load a previously saved route.

On the R

OUTE

LANNING

INDOW

2. Tap the

Show Route

button.

The map opens in

Preview mode

and displays the calculated route.

3. Tap the

Start Navigation

button or start driving.

The map changes to

Navigation mode

4. When navigating with with your

NAVIGON 5100 max

on a controlled access road-

way, tap the screen.
The

AVIGATION

MODE

MAP

FUNCTIONS

WINDOW

displays.

Note:

This feature is only available when traveling on controlled access roads, such as

interstate highways.

Summary of Contents for PNA 5100













































































































































































Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands

Navigon PNA 5100, User Manual

Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands