Navigon PNA 5100 User Manual Download Page 97

Page: 97 / 172

My Destinations

Importing Destinations from Outlook

December 2008

NAVIGON 5100 max User’s Guide

Version 2.1

NAVIGON, INC.

The selected contacts are shown in the right pane.

9. In the lower right hand pane, click on

Copy to Memory Card

The selected Outlook contacts have been saved on the device. These contacts can be
accessed on the from the

My Destinations

button the

NAVIGON 5100 max

Delete Outlook Contact Information From the NAVIGON 5100 max

1. Make sure that your computer and your

NAVIGON 5100 max

are powered on.

2. Connect the large end of a USB cable to your computer and the small end of the

cable to your

NAVIGON 5100 max

On your computer:

3. Navigate to the location where you installed the NAVIGON Sync software (See

page 75) and double click on the

Sync.exe

file.

The NAVIGON S

YNC

WINDOW

displays.

4. On the

NAVIGON S

YNC

WINDOW

, at the top of the right hand pane, click

Read from

Memory Card

The contact information that is currently saved on your device is shown.

Summary of Contents for PNA 5100













































































































































































Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands

Navigon PNA 5100, User Manual

Search results

Summary of Contents for PNA 5100

Reviews:

Related manuals for PNA 5100

Brands by name

Popular brands