User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
Before you begin
- 17 -
2. Tap
on
(NAVIGON Live).
You will be asked whether you want to activate the
NAVIGON Live
services.
3. Tap
on
Yes.
4. Enter the activation code.
5. Tap on Activate.
The
NAVIGON Live
services are now activated.
6. Tap
on
OK.
The following message appears: "You are sending 'Floating Car
Data' to NAVIGON in anonymised form. The evaluation of these
data will help in calculating times of arrival more precisely, in
recognising traffic congestion sooner, and in planning alternative
routes more reliably. No information about your person can be
derived from the data. If you do not agree, select 'No' for the setting
'Optimise Traffic Recognition'."
7. Tap
on
OK.
The
N
AVIGATION
window is opened. From here you have access to all
the functions of your navigation device and all available
NAVIGON Live
services.
2.7
Navigating with GPS
GPS is based on a total of at least 24 satellites orbiting the Earth and
continuously transmitting signals of their position and time. The GPS
receiver receives this data and calculates its own geographical position
on the basis of the information transmitted by the various satellites.
Data from at least three satellites is required for positioning with an
acceptable degree of accuracy. With data from four or more satellites it
is possible in addition to determine the position's altitude above sea
level. Positioning is accurate to within three metres.
Once the navigation device has determined your position, this position
can be used as a starting point for calculating a route.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
Calculation of the current position and its representation on the map
take place approximately once every second. In other words, your
current position is always shown on the map.
