Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 90 / 97

User Manual NAVIGON Mobile Navigator
- 88 - Basic Settings
Setting Meaning and possible values
Show Speed Limits
Select if or how you want highway speed
limits displayed.
Yes: Speed limits will be shown.
Only if exceeding: Speed limits will only be
shown if they are exceeded.
No: Speed limits will not be shown.
The factory default is Yes.
Note: This display depends on the
information being available in the map
material that is currently being used. This is
not always the case on all streets.
Attention! The information in the map
material could be incorrect on account of
sudden changes (construction sites etc.)!
The traffic situation and the signposts on
site have priority over the information given
by the navigation system.
Warnings Within
Urban Areas
Determine the excess speed at which you
would like to be warned in populated areas.
The factory default is 5 mph too fast.
Warnings Outside
Urban Areas
Determine the excess speed at which you
would like to be warned outside populated
areas.
The factory default is 10 mph too fast.
Warn Against
Certain Speed
Limits
Determine whether you should (Yes) or
shouldn't (No) be warned of speed
restrictions that apply in special
circumstances (rain, snow, certain times of
day, etc.).
The factory default is Yes.
Menu Animation
Determine whether opening and closing
menus should (Yes) or shouldn't (No) be
animated.
The factory default is Yes.
Distance Unit
Determine whether distances should be
shown Kilometers or in Miles.
The factory defaults depend on the
language in which you are operating the
software.
Time Format
Determine whether times should be shown
in 12h (am/pm) or in 24h format.
The factory defaults depend on the
language in which you are operating the
software.
Coordinate Format
Specify whether decimal coordinates (e.g.
16,5425°) or coordinates in minutes and
seconds (e.g. 16°32'33'') should be
displayed.