Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 36 / 97

User Manual NAVIGON Mobile Navigator
- 34 - Specifying a new destination
4.3.3 Quick access to points of interest
The quick access system contains three categories of points of
interest. Destinations in your vicinity that correspond to these
categories can be listed quickly without the need for making
additional entries.
You can configure which categories of points of interest are
available for quick access. Refer to chapter "Categories for quick
link and for POI on Route" on page 90 for more information.
Note: GPS-tracking must be sufficient to determine the position.
Adequate GPS-tracking can be recognized by the (GPS ready)
symbol.
For more detailed information, please refer to chapter "GPS
status" on page 70.
1. In the M
AIN
W
INDOW
tap on the New Destination button.
The New Destination menu opens.
The categories that are selected for quick access are depicted
as symbols at the bottom of the menu.
2. Tap on the category from which you would like to select a
point of interest.
The Name of the Destination list opens. It contains the
nearest points of interest in the specified category, sorted by
distance.
If the list is long, you can move within it using the (Up)
and (Up) buttons.
3. Tap on the name of the destination. The map opens in
Preview mode. You can start navigating here.
4.3.4 Specifying the destination country or state
Over the right upper hand corner of the uppermost input field of
the windows A
DDRESS
, POI
IN A CITY
, and POI
OF NATIONAL
SIGNIFICANCE
you will find the State or Country button. It shows
the abbreviation of the country/state that is currently used for
planning navigation destinations.
If your destination is in a different country, then proceed as
follows:
1. Tap on the State or Country button.
The Covered Countries list opens.
You can move within the list using the buttons (Up) and
(Down).