Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 81 / 97

User Manual NAVIGON Mobile Navigator
Useful Functions - 79 -
In the TMC S
ETTINGS
window you can set and configure the
TMC-sender, this will determine the effect that the reception
of a message concerning your route will have on its
calculation.
Setting Description and possible settings
Tuning Mode
Determine the settings of the station
chosen to receive traffic messaging.
Automatically
Hold station
Hold frequency
For detailed information, please refer to
chapter "Tuning Mode", page 80.
Factory-setting is Automatically.
Recalculate Route
Determine how new messages concerning
your route should be managed.
Automatically: An alternative route avoiding
the traffic obstruction will be calculated.
On request: The message is displayed. In
this window you can determine whether
or not an alternative route should be
calculated. For detailed information,
please refer to chapter "Managing TMC
information", page 79.
This setting only takes effect if the route
profile has been set to consider traffic
jams. See "Route Profile", on page 91).
Factory-setting is Automatically.
3. Select your desired settings.
4. Tap the Done button to close the TMC S
ETTINGS
window.
8.8.3 Managing TMC information
You can configure the TMC settings to determine how TMC
information concerning your route should be managed.
For information on how to determine the settings, please refer to
"TMC Settings", page 78.
Note: This setting only takes effect if the route profile has been
set to consider traffic jams. For detailed information, please refer
to chapter "Route Profile", page 91.