Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 40 / 97

User Manual NAVIGON Mobile Navigator
- 38 - Specifying a destination on the map
Refer to chapter "Creating a voice command" on page 43 for
how to set up a speech command.
1. In the M
AIN
W
INDOW
tap on the Voice Command button.
2. After being prompted, speak into the navigation device to
activate the voice command that you have stored for the
desired destination.
The name of the designation appears in a dialog box.
3. Tap on the Start Navigation button.
Information about starting navigation can be found in chapter
"Starting navigation" on page 39. Please read there further.
4.7 Specifying a destination on the map
You may specify a navigation destination directly on the map. In
addition to cities and streets, you can also quickly select points of
interest.
1. In the M
AIN
W
INDOW
tap on the Options button.
The options list opens.
2. Tap on the Show Map button.
The map opens in Destination search mode.
3. Tap on the point that you would like to navigate to.
Note: Refer to chapter "Map in the Destination search mode"
on page 65 for information on how to change the map section
so that your destination can easily be seen.
The destination that you have selected appears in the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the Selected Destination
field in the lower third of the screen.
4. Tap on the (OK) button.
The D
ESTINATION ON
M
AP
window opens. The detailed address
data of the selected destination is displayed in the upper left-
hand corner.
5. Tap on the Take Me There button.
The map opens in the Preview mode.
Information about starting navigation can be found in chapter
"Starting navigation" on page 39. Please read there further.