Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 92 / 97

User Manual NAVIGON Mobile Navigator
- 90 - POI
Ù
Tap on the Done button. Any changes you have made will be
accepted.
Ù
Tap on the Cancel button. Any changes you have made will
not be accepted.
9.4 POI
The POI window shows which categories are available on the
three buttons of the quick link in the N
EW
D
ESTINATION
menu .
These categories are also shown if you execute the POI on Route
function during navigation.
Also, you can set which categories of points of interest are to be
displayed on the map.
9.4.1 Categories for quick link and for POI on Route
1. Tap on the category you wish to change. (Direct Access 1,
Direct Access 2, Direct Access 3)
The list of categories opens. You can move through them by
using the (Up) and (Down) buttons buttons.
2. Tap on the category that should be available in the quick link
and for the POI on Route function.
3. Tap on the OK button.
The POI window opens again. The new category is entered in
the respective field.
Note: The following categories are already set as factory
defaults:Gas station, Parking, Restaurant.
9.4.2 Indications on the map
1. Tap on the Categories Shown button.
The list of categories opens. You can move through them by
using the (Up) and (Down) buttons.
2. Select the categories that you want to be displayed on the
map.
3. Tap on the OK button.
The POI window opens again.