Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 56 / 97

User Manual NAVIGON Mobile Navigator
- 54 - Navigation
6.3 Navigation
The route must first be calculated. Thereafter, you may begin
navigating or just simulate the route.
6.3.1 Calculating and displaying the route
In order to receive an overview it is possible to calculate the
route and display it on the map even without GPS-tracking.
The R
OUTE
P
LANNING
window is open. You have specified the
starting point and at least one route stop (refer to chapter "Route
planning", page 48) or load a route (refer to chapter "Loading
routes", page 52).
1. Tap on the Show Route button.
The map opens in Preview mode.
The starting point and the route stops are marked with flags.
The distance and the estimated time of the trip are indicated
for each leg of the route. This data is also indicated for the
entire trip.
6.3.2 Simulating the route
You can also just simulate navigation.
Note: GPS-tracking is not required for simulating the route. Only
routes up to maximum distance of 60 mi can be simulated.
You have calculated and displayed a route. (see chapter
"Calculating and displaying the route", page 54)
1. Tap on the Options button.
The options list opens.
2. Tap on the Simulation option.
The route is recalculated for the simulation. Simulation is
started after the calculation.
Exit simulation
Route simulation can be terminated at any time.
1. Tap on the (Back) button.
A dialog box will prompt you to confirm your exit from the
navigation.
The M
AIN
W
INDOW
then opens.