Navigon 10000100 - N100 LOOX Portable GPS Navigator, User Manual

Page: 27 / 97

User Manual NAVIGON Mobile Navigator
Navigation - 25 -
4.2 Starting Mobile Navigator
1. Switch on your navigation device.
2. Tap on the navigation software icon.
Each time you start the navigation software, the following
message will appear:
"WARNING!
DANGER OF ACCIDENT
You understand that you should not operate the navigation
system while driving. Do not use the navigation system if it
presents a risk to you or any other person or if it is a
distraction.
OBEY ALL TRAFFIC LAWS
You understand that you must always obey the local traffic
laws and observe all road signs. Local traffic laws and actual
traffic signs always have priority over the information and
directions you receive from NAVIGON Mobile Navigator. The
navigation instructions might be inaccurate or incorrect due to
detours or construction."
3. Tap on the button OK after you have read and fully
understood the text.
4. Tap on the Cancel button in order to exit the navigation
software again if you do not wish to accept these instructions.
The M
AIN
W
INDOW
opens.
4.2.1 Initializing the GPS receiver
Note: It may require 20 minutes to initialize the integrated GPS
receiver for the first time.
Thereafter, GPS-tracking begins within one minute after the
navigation device is switched back on.
Initialization can take up to 10 minutes if the navigation device
has been idle for over a week.
Initialization of the GPS receiver will begin as soon as the
navigation device is switched on.
The GPS symbol appears in the right upper corner of the display.
It can show three different states:
Icon Meaning Explanation
No GPS
The GPS receiver is switched off.
- OR –
An external GPS receiver has not been
connected properly.