Navico SIMRAD AI50 Manual For Use Download

Page: 75 / 84

Alarms 75

If the original compass unit returns to the network this

will automatically be re-selected, and a message window

will appear to indicate this.

To confirm and clear this alarm, press

, this will close

the window and return you to current display.

8.7 Safety message alarm

AIS technology incorporates a messaging system that

allows approved users to broadcast safety messages that

will appear as text in the AIS display.

This is a

Level 3

alarm, and will activate if a safety

message is received from another vessel over the AIS

network. An audible alarm will sound and a “Safety

Message Alarm” window will open, displaying the received

information and the safety message. An example is

shown here.

Figure 8.5 – Example Safety Message

To confirm and clear this alarm, press

, this will close

the window and return you to current display.

Summary of Contents for SIMRAD AI50





















































































Search results

Summary of Contents for SIMRAD AI50

Reviews:

Related manuals for SIMRAD AI50

Brands by name

Popular brands

Navico SIMRAD AI50, Manual For Use

Search results

Summary of Contents for SIMRAD AI50

Reviews:

Related manuals for SIMRAD AI50

Brands by name

Popular brands