Menu Mode 47
Figure 6.15 - Units of Measure
Highlight the one you wish to change then select it.
Scroll through the options and select the one you wish to use.
Set local time
This section allows you to apply an offset to the GPS’s
UTC in 1 hour steps, (-13 to +13 hours), as displayed in
“Own Vessel Information”.
From the System Setup menu highlight “Set Local Time”,
and select it. A window opens displaying “Time Offset”,
where the default value is “0 Hours”.
Figure 6.16 – Set Local Time
As there is only one choice, “Time offset” will already be
highlighted, simply select it, then scroll through the pre-
defined values to the appropriate offset and select it again
in order to store it.
This will only affect the time being displayed in the own
vessel information bar. All received vessel information will
be displayed as UTC.
or
X
or
X
or
X
or
X
or
X
or
X
)
)
Summary of Contents for SIMRAD AI50
