Initial Configuration 33
Figure 5.12 – Vessel Dimensions
& GPS Reference Entry Screen
All numeric entries must include preceding zero’s. For
example if “Dim A “ is 20 metres, it should be entered
as “020” and not “20” before “OK” is selected, if not the
following message will appear.
Figure 5.13 - Dimension entry error
Enter the required dimensions of your vessel, (in metres),
with reference to the GPS antenna, using the same
method of entry as described during MMSI entry.
Once you have entered a dimension, the cursor will
advance to the next one. When complete, highlight "OK"
and select it to accept your entry. The display returns to
the vessel configuration Information window.
If you have made an incorrect entry, use the same method
to correct it as described in “MMSI Entry” earlier in this
section.
Summary of Contents for SIMRAD AI50
