66 Display Mode
To cancel individual tracking, select the vessel icon you wish
to cancel and press the
TRACK/CLR TRK
key. The vessel
icon will return to its non-bold state and the existing trail will
be cleared.
7.14 Tracking your own vessel
To turn own vessel tracking on, place the cursor over your
vessel to highlight it and press the
TRACK/CLR TRK
key
once. Your icon will turn red and bold, and tracking will
start immediately, although a trail may not be noticeable
until your vessel has moved sufficiently.
Figure 7.10 - Tracking your own vessel
If “Tracking Offset” is not active when you select “TRACK/
CLR TRK”, your vessel will be shown as a small circle at
the centre of the display.
If “Tracking Offset” is already active when you select
“TRACK/CLR TRK”, your vessel will be shown as a
distinctive boat icon at its current GPS location on the
display, See section 6.2.
7.15 Clearing down all trails
To clear all existing vessel trails, including your own vessels,
press and hold
TRACK/CLR TRK
for 2 seconds.
All vessels will return to their non-bold state and all tracks
will be cleared from your display.
CLR TRK
TRACK
CLR TRK
TRACK
)
)
)
)
CLR TRK
TRACK
CLR TRK
TRACK
Summary of Contents for SIMRAD AI50
