22 Keypad Overview
3.2 PWR/Lights key (powering on/off)
To turn on the AI50, press and hold the
PWR/
key for
approximately 0.25 seconds.
When turning your AI50 on for the
fi
rst time, you will be
directed to con
fi
gure it for full use. If this is declined the
AI50 will only function as a receiver until fully con
fi
gured.
(Refer to chapter 5).
Press and holding the
PWR/
key, will power the unit
down. A brief message will appear until the unit turns off.
Figure 3.2 - Power down message
3.3 Navigation keys
The circular 8-way NavPad, (Figure 3.1 Item 1) can
operate in a variety of ways depending on which mode
the unit is in.
Display mode
The NavPad keys are used to position the cursor around
the screen. By using a combination of keys, for example,
pressing
S
and
W
together, will make the cursor move
diagonally up and to the left.
Menu mode
The
ST
keys are used to highlight menu items before
selecting them.
The
X
key is used to select a new menu item, or go
further into an item’s sub menu.
A single press of the
W
key returns you to the previous
menu or mode.
Press and hold the
W
key returns you to the Display Mode
)
)
Summary of Contents for SIMRAD AI50
