21
12. Remove the indicated ground screw using a #2 Phillips screwdriver.
13. Remove the 4 Motor mounting nuts, and remove the Motor.
14. Installation is the reverse procedure.
Replacing the Treadle Assembly
!
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or repairing this machine.
Tools Required: #2 Phillips Screwdriver, 13 mm wrench, 5 mm hex head wrench
1. Remove the 4 indicated bolts of the Rear Step using a 4 mm hex wrench.
2. Slide Rear Step toward the back of machine, and lift off.
3. Remove the 4 indicated screws of the Right Rear Side Cover using a #2 Phillips screwdriver.
4. Slide the Right Rear Side Cover off of the machine.