Chapter2. Receipt Printer Error Code
2-4
© 2009
Nautilus Hyosung Inc.
All Rights Reserved.
Error Code
Description
Trouble shooting
AXXX500
Receipt paper setting error
Jam and miss-feeding are
detected during receipt paper is
loaded. -> This error occurs
when the setting sensor detects
a dark part.
1. Remove paper jam and reload.
2. Check the level oepration position in
the jam sensor.
3. Check if cable is cut or the
connector is wrongly inserted (in the
jam sensor).
4. Check logic related to the jam
sensor.
5. Check if the return motor is
operating.
6. Check if cable is cut or a connector
is wrongly inserted in the return
motor, and check related logic.
AXXX600
During the test in the offline
mode of the Slip Printer
1. Turn on/ff the Slip Printer.
AXXX800
Receipt paper cutting error
Receipt paper cutting failed.
1. Remove paper jam.
2. Check if the cutter properly rotates
and the swtich normally functions.
3. Check if cable is cut or the
connector is wrongly inserted.
4. Check logic rlated to the cutter of
the Slip Printer board.
ADNxx00
Receipt printer connection
failure
1. Check if communication cable
between the Control Electronics and
the Slip Printer is cut or the
connector is wrongly inserted.
2. Check communiation logic of the
Control Electronics and the Slip
Printer board.
3. Check if the CPU of the Slip Printer
board is normally running.
4. Check if the power is normally
supplied to the Slip Printer.