86
87
Note: If the readings remain in the range of 0 to 2 meters (0-6 feet) for
5 minutes, the sensor will turn off automatically.
Turn off the Sensor:
After turning on the sensor, you can turn it off manually.
1. Press and hold pusher for 2 seconds.
2. The 4th center hand will move back to the OFF (6 o’clock) position.
Recall Maximum Depth/Minimum Temperature
1. Pull crown to position “B”.
2. The center and lower hands will move to display the maximum
recorded depth value and the minimum recorded temperature value
respectively.
3. The center and lower hands will move to display 0 meters/feet and
0ºC/32 ºF respectively if the watch has not yet been used.
4. The crown must be screwed back in prior to use to prevent any
water resistance issue.
Battery level Detection
The watch determines the battery level status and provides the user
with a visual indication corresponding to the current battery level. The
battery level status is classified as Normal Level, Battery Low Level,
and Replace Battery Level, with each level indicated by the movement
of the second hand.
In Normal Level, the second hand will move one hand position every
one second.
In Battery Low Level, the second hand will only move at 2-second
intervals and shall move by two hand positions. It is recommended
that the user replace the battery.
In Replace Battery Level, the second hand will only move at 5-second
intervals and will move by five hand positions. At this point, dive
mode cannot be activated, and the user must replace the battery
immediately.