NAUTICA VX3J, User Manual, Page: 32 / 44

62 63
To set the Alarm:
1. Press “Mode” button until alarm mode appears.
2. Press and hold “Set” button to begin setting alarm.
3. Press “Mode” button to select the alarm hour or minute for setting.
4. Press “Start/Stop” button to set the alarm hour or minute.
5. Press “Set” button to exit the alarm setting.
CHRONOGRAPH MODE
The chronograph counts up to 23 hours, 59 minutes, 59.99 seconds
with 1/100 second and split time function.
1. Press “Mode” button until chronograph mode appears.
2. Press “Start/Stop” button to start the chronograph.
3. Press “Start/Stop” button to stop the chronograph.
4. Press “Set” button again to reset the chronograph.
Split time Measurement
Example of using split time measurement for two runners. Two runners
can be timed simultaneously; the first runner’s time can be recorded
while the second runner’s time will continue to be accumulated until he
finishes.
1. Press “Start/Stop” button to start the timing of the first and second
runner
2. Press “Set” button to stop and record the timing of the first runner.
("SPL" will blink on the display if the split time function is active.
Even though the stop watch is not on display, the timing will
continue to run internally.)
3. Press “Set” button again to see the timing of the second runner.
The stopwatch will switch to display the internal accumulated time
and continue timing of the second runner.
4. Press “Start/Stop” button to stop the timing of the second runner
and record the time.
5. Press “Set” button to reset timing.
TIMER fUNCTION
1. Press “Start/Stop” button to start the timer.
2. Press “start/Stop” button to stop the timer.
3. Press “Set” Button to reset the timer.
To set the Timer:
1. Press “Mode” button until timer mode appears.
2. Press and hold “Set” button to begin setting timer.
3. Press "Mode" button to select between hour or minute.
4. Press “Start/Stop” button to set the timer hour or minute.
5. Press “Set” button to exit the timer setting.
ElECTROlUMINESCENT BACKlIGHT
Press “Light” Button to activate the light function under each mode
anytime.