NAUTICA VX3J, User Manual, Page: 15 / 44

28 29
Before using the stopwatch, reset stopwatch chrono hands to the “12”
and “0” position.
Standard Stopwatch Measurement
1. Press pusher “A” to start timing.
2. Press pusher “A” again to stop timing.
3. Press pusher “B” to reset.
Accumulated Elapsed Time Measurement
1. Press pusher “A” to start timing.
2. Press pusher “A” again to stop timing.
3. Press pusher “A” to restart timing.
4. Press pusher “A” again to stop second timing.
5. Press pusher “B” to reset.
Split Time Measurement
Example of using split time measurement for two runners. Two runners
can be timed simultaneously; the first runner’s time can be recorded
while the second runner’s time will continue to be accumulated until he
finishes.
1. Press pusher “A” to start the timing of the first and second runner.
2. Press pusher “B” to stop and record the timing of the first runner.
(Once pusher “B” is activated, even though the chrono minute hand
and the big stopwatch sec. hand stop on the dial, the stopwatch still
continues to run internally.)
3. Press pusher “B” to catch up the timing of the second runner. The
stopwatch sec. hand will jump to show internal accumulated time
and to carry on timing of the second runner.
4. Press pusher “A” to stop the timing of the second runner and record
the time.
5. Press pusher “B” for third time to reset, all stopwatch chrono hands
will return to “12” and “0” position.
CORRECTIVE MODE fOR STOPWATCH CHRONO HANDS
1. Pull crown to position “C”.
2. Press pushers “A” and “B” simultaneously for at least 2 seconds.
3. The big stopwatch sec hand rotates by 360 degree to activate
corrective mode.
TO ADJUST THE BIG SEC. STOPWATCH HAND
If it is not located at “12” or “0” position, either press pusher “A”
continuously or repeatedly until the hand moves by each interval and
returns to “12” and “0” position.