NAUTICA VX3J, User Manual, Page: 11 / 44

20 21
5. Press pusher “B” repeatedly to set stopwatch second hand to “0”
position.
6. Push crown to position “A”.
Remarks:
This is suggested to check the hour and minute hands to ensure they
are correct before pushing the crown back to position “A”
TO ADJUST STOPWATCH HAND (for yM92) :
1. Pull crown to “C” position.
2. Press pusher “A” for 2 seconds.
3. Press pusher “B” to “0” setting for the 1/20 sec. hand. If the hand
is not at “0” or “12” position, then, press pusher “B” repeatedly, until
the hand moves by each intervaI and returns to “0” or “12” position.
4. Press pusher “A” for 2 seconds.
5. Press pusher “B” to “0” setting for the stopwatch sec. hand. If the
hand is not at “0” or “12” position, then, press pusher “B” repeatedly,
until the hand moves by each intervaI and returns to “0” or “12”
position.
6. Press pusher “A” for 2 seconds.
7. Press pusher “B” to “0” setting for the stopwatch min. / hour hand.
If the hand is not at “0” or “12” position, then, press pusher “B”
repeatedly, until the hand moves by each intervaI and returns to “0”
or “12” position.
8. Push crown to “A” position after the adjustments of all stopwatch
hands.
Note: Please make sure that the stopwatch is stopped and reset
before adjusting.