NAUTICA VX3J, User Manual, Page: 23 / 44

44 45
This Chronograph watch has three functions:
TIME, CALENDAR, STOPWATCH
TIME
To set the time:
1. Pull crown to position "C" , the small hand at 6 o'clock returns to
"60" position.
2. Turn crown clockwise to correct time.
3. Push crown to position "A", the small hand at 6 o'clock begins to run.
CAlENDAR
To set the date:
1. Pull crown to position "B".
2. Turn crown counter clockwise to correct date.
3. Push crown to position "A".
OS62
A B C
CROWN POSITION
DATE
STOPWATCH MINUTE
HAND
STOPWATCH HOUR
HAND
STOPWATCH SECOND
HAND
STOPWATCH
This stopwatch is able to measure and display time in 1/20 ( 1/1)
second united up to max 11 hrs 59 min 59 sec.
The retrograde stopwatch 1/20 ( 1/1) second hands keeps continuously
running for 60 seconds after starting, and then stops at "0" position.
1. Press pusher "B" to enter the chrono mode.
2. Press pusher "A" to start timing.
3. Press pusher "A" again to stop timing.
4. Press pusher "B" to reset.
Note: Motion of the retrograde stopwatch is a demo. Actual measurement
will be shown when it stopped while "stop" button is pressed.
Correct the stopwatch hands
If after resetting the stopwatch hands it is found that they are not at
the '12' or '0' position, correct them as follows:
1. Pull crown to position "B".
2. Press pusher "A" to set the stopwatch second hand to the "0"
position.
3. Press pusher "B" to set the stopwatch 1/20 second hand to the "0"
position.
4. The stopwatch hands can be advanced rapidly by continuously
pressing pushers "A' or "B".
5. Once the hands return to "0" position, reset time and push crown to
position "A".