manualshive.com logo in svg

NAUTICA VX3J, User Manual, Page: 38 / 44

Share
Download
NAUTICA VX3J User Manual Download Page 38

74

75

4.  Press  pusher  “A”  or  “B”  to  move  the  4th  center  hand  backward  or 

forward  to  adjust  the  world  time,  respectively,  to  set  the  world  time 
zone  to  be  the  same  as  the  home  time  zone.  Press  and  hold  a 
pusher to change the time quickly. The hands move together as the 
center hand makes one revolution, the upper hand moves one hour. 

5.  Press  pusher  “C”  to  adjust  the  season  if  the  displayed  season  is 

not correct for the home time zone. If the home time zone observes 
daylight savings time, the upper hand will move by one hour.

6.  Push crown to position "A" after setting is complete.

City Time Display Selection:

Press  pusher  "A"  or  "B"  to  move  the  4th  center  hand  backward 
or  forward  to  select  city.  The  upper  hand  will  show  the  time  in  the 
selected city.

Note:  The world time scale is 24 hours.

4

th

 CENTER HAND ADJUSTMENT

1.  Pull  crown  to  position  “C”.  The  upper  and  lower  hand  will  reset  to 

the end of their sweeps automatically.

2.  Press  pusher  “A”  or  “B”  to  adjust  the  4th  center  hand  to  “12” 

position.

3.  Push back the crown to position “A”.

Note:  If  no  pusher  is  pressed  within  five  seconds  of  the  hands 

stopping,  the  watch  will  proceed  to  the  world  time  setting 
operation (see WORLD TIME setting).

SEASON SETTING

The  season  setting  allows  the  watch  to  compensate  for  daylight 
savings time (also called “summer time”).

The  watch  provides  one  setting  to  represent  daylight  savings  time 
and  standard  time.  For  the  watch,  the  period  of  daylight  savings 
time  is  SUMMER  and  the  period  of  standard  time  is  WINTER.  When 
the  season  in  one  city  is  set  to  SUMMER,  all  cities  in  the  same 
hemisphere  are  automatically  set  to  SUMMER,  while  all  cities  in  the 
other hemisphere are automatically set to WINTER. The watch knows 
which cities are in each hemisphere.

Press pusher “C” to adjust the season in the selected city.

Summary of Contents for VX3J













































Reviews:

No comments