NAUTICA VX3J User Manual Download Page 33 | Manualshive

Page: 33 / 44

NAUTICA VX3J User Manual Download Page 33

64

65

This Digital watch has 6 functions

Time / Calendar / Day of week / Chronograph / Alarm /
Electroluminescent backlight

MODE SElECTION

Press “Mode” button to cycle through “TIME”, ”CHRONOGRAPH”,
“ALARM” and “TIME SET” mode.

MW32

MODE

lIGHT

ADJUST

SET

CROWN

DIGITAl MODElS

TIME MODE

In time mode, the watch displays the current time information on hour,
minute, second, date, month and day of week. It also displays the
"ON/OFF" status of Alarm or Chime.

CHRONOGRAPH MODE

The sports watch counts up to 19 hours 59 minutes 59.99 seconds
with 1/100 second and split time function.

1.  Press ”Mode” button until chronograph mode appears.
2.  Press “Adjust” button to start the chronograph.
3.  Press “Adjust” button to stop the chronograph.
4.  Press “Set” button again to reset the chronograph.

Split time Measurement

Example of using split time measurement for two runners. Two runners
can be timed simultaneously; the first runner’s time can be recorded
while the second runner’s time will continue to be accumulated until he
finishes.

1. Press “Adjust” button to start the timing of the first and second

runner

«
...
31
32
33
34
35
...
»

Summary of Contents for VX3J













































Reviews:

No comments