56
57
5. Press MODE to select MINUTES, YEAR, MONTH, DAY, DAY of
WEEK, 12 or 24 time display, MONTH-DAY or DAY-MONTH date
display. Press START/STOP or LAP/RESET to advance selected item.
6. Press SET/INDIGLO when done.
7. Press and hold LAP/RESET and wait for beep to change display to
second TIME ZONE. Repeat above to set time.
Note: once date is set, calendar runs automatically.
CHRONOGRPAH
1. Press MODE until CHRONO appears. Watch will briefly display
available storage (1-42).
2. Press START/STOP to start CHRONO.
3. Press LAP/RESET to take a lap. Display of running time resumes
after 5 seconds.
4. Press START/STOP to stop timing. Press again to resume.
5. While CHRONO is stopped, press MODE to enter RECALL mode.
Press START/STOP repeatedly to recall stored lap and split times.
6. Press and hold LAP/RESET to clear stored times. Chrono will
automatically clear. OR
7. In RECALL mode, press and hold LAP/RESET to reset and stored
laps/splits will automatically clear.
COUNTDOWN TIMER
1. Press MODE until TIMER appears. Press LAP/RESET to select
LOOP 1, 2 or 3. Timers will count upwards starting with last LOOP
TIMER set, unless last LOOP TIMER set is 3 (timers will then count
backwards from LOOP 3).
2. Press and hold SET/INDIGLO to set LOOP TIMER. Press START/
STOP or LAP/RESET to set seconds.
3. Press MODE to select MINUTES, press START/STOP or LAP/
RESET to set minutes.
4. Press MODE and then START/STOP or LAP/RESET to select next
LOOP.
5. Repeat above steps to set each additional LOOP.
6. Press SET/INDIGLO when done.