RADIOBEACON TRANSMITTER
ND500II (125 WATTS) DOUBLE SIDEBAND - NO VOICE
Page 7-2
01 November 2003
7.6.1
USE ON CODE COLUMN
: This
column contains a symbol/letter code that is part of a
configuration control management system. When
there is more than one variation of an assembly, each
variation will be assigned a code in this column and
the parts that are unique to a variation will be
assigned the same code. Parts that are common to all
variation will not have an entry in this column. Notes
at the end of each table explain the code's
significance.
7.6.2
REF DES COLUMN
: This column
contains the reference designation for a specific part.
These designations are assigned in accordance with
the requirements of American National Standard
Specification ANSI Y32.16. Each reference
designation index is sorted and listed
alpha/numerically according to the reference
designations in this column.
7.6.3
NAME OF PART AND
DESCRIPTION COLUMN
: This column contains
the name and descriptive information for each part.
The key word or noun is presented first, followed by
the adjective identifiers.
7.6.4
NAUTEL'S PART NO. COLUMN
:
This column contains the Nautel part number
assigned to each part. This number is Nautel's
drawing number for Nautel manufactured parts,
Nautel's configuration control number for assemblies
that are under configuration control management or
Nautel's inventory management number for
purchased parts.
7.6.5
JAN/MIL/OEM PART NO. COLUMN
:
This column contains an original equipment
manufacturer's part number for a part. A single part
number is listed for each part, even though there may
be more than one known manufacturer. The listed
number is Nautel's usual or preferred choice. A JAN
or MIL number has been assigned as the
manufacturer's part number, where practical, to
assist the user in finding a suitable replacement part.
The use of this number does not restrict Nautel from
selecting and using commercial equivalents, where
their use will not degrade circuit operation or
reliability, during manufacture.
7.6.6
OEM CODE COLUMN
: This column
contains a five digit coded group as the original
equipment manufacturer's (OEM) identifier. The
code was extracted from Cataloging Handbook
H4/H3 - Commercial and Government Entity (Cage)
Code. Manufacturers that were not listed in the
catalog when this listing was compiled have been
assigned a unique five-letter code. This code is
assigned arbitrarily and has no other significance.
The manufacturer identified for parts that have JAN
or MIL part numbers are Nautel's normal supply
source for that part.
NOTE
OEM code 37338 is listed for parts manufactured by
Nautel or to a Nautel control drawing. United States
of America customers should refer all replacement
part orders to Nautel Maine Incorporated (OEM code
57655).
