Nautel GV3.5, Operation & Maintenance Manual, Page: 173 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.156 VERSION 0.2 2014-07-23
Setting the Clock
The GV5/GV3.5 controller module’s internal clock uses an externally accessible backup battery, and
therefore maintains an accurate date and time, even during power outages. The date and time needs to
be set when the transmitter is first installed, or after a power outage if the backup battery has failed.
You can set the date and time using the AUI (see Setting the Clock - using the AUI ) or using the controller
UI (see Setting the Clock - Using the Controller UI, on page 3.2.158 ). If you change the clock setting on
the controller UI, it will also be reflected on the remote AUI, and vice versa. If the NTP feature is
enabled (see
Enabling NTP, on page 3.2.159 ), the clock will set automatically and cannot be manually
adjusted.
Setting the Clock - using the AUI
You can set the GV5/GV3.5’s time and date using the AUI’s
Time Setup
page (see Figure 3.2.134 ) by
selecting
Time Setup
from the
User Settings
options. The date and time setting is displayed in the
upper, left corner of the AUI.
Figure 3.2.134: Time Setup Page