Nautel GV3.5, Operation & Maintenance Manual, Page: 176 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.159
Configuring NTP Servers
NOTE
: The following function is only available via the AUI; however, the use of NTP can also be
enabled/disabled from the controller UI (see Enabling NTP, on page 3.2.159 ).
You can configure one or more NTP (Network Time Protocol) servers to allow clock synchronization with
all computers on the same network as the GV5/GV3.5. To view the AUI’s
NTP Servers
page (see
Figure 3.2.136 ), select
NTP Servers
from the
User Settings
options. There are several functions
available on this page - enabling NTP, monitoring NTP server status and managing servers.
NOTE
: The accuracy of the NTP synchronization is related to the distance to the server. For this reason,
Nautel recommends that you choose servers in the same country as the equipment. If this is not
possible, attempt to connect to servers from the same continent.
Figure 3.2.136: NTP Servers Page
Enabling NTP
Enable the NTP function by selecting the
Enable NTP
checkbox. Disable by de-selecting the
Enable
NTP
checkbox. Press the
Apply
button to activate any change.