Nautel GV3.5, Operation & Maintenance Manual, Page: 186 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.169
Figure 3.2.145: Signal Generator Editing Screens
Select a level between 0 and 100%. Press the cancel ( X )
button to discard changes and return to the previous menu.
Default is 100%.
When Type is set to Sine Sweep, select a start frequency
between 0 and 20 kHz. Press the cancel ( X ) button to discard
changes and return to the previous menu. Default is 1 kHz.
Select a type - None, Sine Wave, Sine Sweep or Bandlimited
Noise. Press the cancel (
X
) button to discard changes and re-
turn to the previous menu.
Select ON (enabled) or OFF (disabled). Press the cancel ( X )
button to discard changes and return to the previous menu.
Default is OFF.
When
Type
is set to Sine Sweep, select a stop frequency be-
tween 1 and 20 kHz. Press the cancel (
X
) button to discard
changes and return to the previous menu. Default is 1 kHz.
When Type is set to Sine Sweep, select a time between 0 and
60 s. Press the cancel ( X ) button to discard changes and
return to the previous menu. Default is 30 s.
When Type is set to Sine Wave, select a frequency between
0 and 20 kHz. Press the cancel ( X ) button to discard changes
and return to the previous menu. Default is 1 kHz.