
GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL
OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23
PAGE 3.2.83
Pilot Settings.
When you select
Pilot Settings
from the
Preset
editing options screen, you can edit
the settings of the pilot signal (see
Figure 3.2.62: Pilot Settings menu
Use the up and down buttons to move the cursor to the desired pilot setting and then press the right
button to enable editing of the parameter.
shows all the editing screens for the
Pilot
Settings
menu. Within any of the editing screens, use the up and down buttons to edit or toggle a
parameter value, noting the minimum and maximum limitations indicated at the bottom of the display.
When complete, press the accept (checkmark) button to save the change. Press the cancel (
X
) button to
discard changes and return to the previous menu.
Figure 3.2.63: Pilot Settings editing screens
Use the up and down buttons to select a level between 6 and
12% (in 0.1% increments), then press the accept (checkmark)
button to save the change. Press the cancel (
X
) button to dis-
card changes and return to the previous menu. Default
level is 9%.
Use the up and down buttons to select a phase angle be-
tween 0 and 360 degrees (in 0.1 degree increments), then
press the accept (checkmark) button to save the change.
Press the cancel (
X
) button to discard changes and return to
the previous menu. Default level is 0.0 degrees.
Use the up and down buttons to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X
) button to discard changes and return to the previ-
ous menu. Default setting is OFF.
Summary of Contents for GV3.5
