Nautel GV3.5, Operation & Maintenance Manual, Page: 38 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.21
User Settings - Edit Presets -
Mod Loss Edit the selected preset’s modulation loss functionality, such as enable/
disable, setting threshold, setting timeout period, setting resulting
action and selecting a backup preset. page 3.2.95
User Settings - Edit Presets -
Audio Delay Edit the selected preset’s audio delay. page 3.2.97
User Settings - Edit Presets -
Copy Another Preset Copy the selected preset’s settings to another preset. page 3.2.97
User Settings - Set Clock Set precise time and date. page 3.2.158
User Settings - Network
Settings View and/or set network information such as MAC address (view only),
DHCP on/off status, IP address, netmask and gateway. page 3.2.141
User Settings - Pilot Sample Set the pilot sample level for the controller’s rear panel BNC connector. page 3.2.167
User Settings - Signal Gen Enable/disable and setup the internal signal generator. page 3.2.168
User Settings - Ext. 10 MHz
Inp Enable/disable the use of an external 10 MHz signal. page 3.2.154
User Settings - Scheduler Enable/disable the scheduler. page 3.2.189
User Settings - FM Mask Select the FM mask - FCC, ETSI or None (turns off mask). page 3.2.170
User Settings - Audio Low Set the low audio thresholds and associated timeout delays. page 3.2.163
User Settings - Turn-On Delay Set the transmitter turn-on delay period. page 3.2.171
User Settings - Ramp-Up
Speed Set the transmitter’s ramp-up delay period. page 3.2.172
View Status View various transmitter parameters (see other View Status options in
this table). -
View Status - View Alarms View all active transmitter alarms. page 3.2.36
View Status - View Meters View the levels of various transmitter parameters, including forward
power, reflected power, PA voltage, PA current and low level dc supply
voltages. page 3.2.57
View Status - View Log View the transmitter’s events log, including alarms, commands, etc. page 3.2.36
View Status - Clear Log Clear the transmitter’s events log. page 3.2.36
Table 3.2.2: Controller UI Screens
Controller UI Screen Function See Page