Nautel GV3.5, Operation & Maintenance Manual, Page: 241 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL NON-STANDARD MAINTENANCE
PAGE 3.4.2 VERSION 0.2 2014-07-23
Transferring Upgrade File
The following steps assume either the laptop will be used to connect directly to the transmitter OR the
transmitter and network computer are currently connected to the same network.
Transmitter IP Configuration
1. From the transmitter AUI, go to
Menu
/
User Settings
/
Network Setup
.
2. Record your current network settings (IP Address, Subnet Mask, Default Gateway).
3. If connecting to the transmitter directly with a laptop, you must set a static IP address. This can
only be done via the front panel interface. From the front panel UI’s
Main Menu
, go to
User
Settings
/
Network Settings
and set the IP address as follows:
– DHCP: OFF
– IP Address: 10.10.10.2
– Netmask: 255.255.255.0
4. Set the transmitter for
Remote
control.
Laptop IP Setup
The following steps assume the operating system is Windows XP. Adapt as required for computers with
different operating systems.
1. On the laptop go to
Start Menu
/
Control Panel
/
Network Connections
/
Local Area Network
.
2. In the Local Area Network Status, open the
General
tab and choose
Properties
. Scroll down and
highlight
Internet Protocol (TCP/IP)
. Choose
Properties
.
3. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
.
4. Enter the following settings:
– IP Address: 10.10.10.1
– Subnet Mask: 255.255.255.0
– Default Gateway: 192.168.1.2
5. In the Internet Protocol (TCP/IP) Properties window, select
OK
.
6. In the Local Area Connection Properties window, select
OK
.
7. In the Local Area Connection Status window, select
Close
.
8. Close the Network Connections window.